Separation of isomers of saturated polycyclic hydrocarbons in packed capillary columns with graphitized thermal carbon black

Summary Using the example of perhydrophenanthrene, perhydroanthracene and cyclopentanodecalin isomers a possibility is shown to use packed capillary columns containing graphitized thermal carbon black for a complete separation of high-boiling mixtures of polycyclic saturated hydrocarbon isomers in accordance with the geometric structure of their molecules.     

A simple method for the calculation of π-bond orders in alternant hydrocarbons

A new method for the calculation of bond orders in alternant hydrocarbons is presented. The method requires a summation over the contributions of various superposition diagrams. Quantitatively, the method is almost as reliable as PPP, and due to its simplicity it can be used for fast and relatively accurate calculation of bond orders. In addition some simple rules are derived, which in many cases can be used to predict the signs of bond orders between nonbonded atoms.Dedicated to Professor J. Koutecký on the occasion of his 65th birthdayResearch supported by the Robert A. Welch Foundation of Houston, Texas     

Molecular parameters and retention characteristics of unsubstituted polyaromatic hydrocarbons in HPLC

Summary The present research studies the possibility of using the correlation dependence between molecular parameters of unsubstituted polyaromatic hydrocarbons (PAH) and their retention in reversed-phase liquid chromatography to optimize the conditions for the separation and identification of unknown peaks on the chromatograms of multicomponent mixtures. A linear correlation equation, that takes the number and environment of the carbon atom in the PAH molecule into account as well as the differences in the specific interactions of isomeric molecules with polar eluent, has been proposed. The adequacy of the proposed PAH retention model was verified by comparing the calculated retention values with the experimental data. The possibility of identifying unsubstituted PAH according to the number of carbon atoms of various types and according to the values of the molecules lengths (calculated on the basis of the retention of these substances under different eluent compositions) was exemplified by various chromatographic systems (reversed phase-eluent-PAH molecules).     

Tricyclo[2.2.0.0]hexane: a new hypothetical molecule which should have only one inverted carbon atom

HF and MP2 calculations with the 6-31G** and 6-311G** basis sets and those at MP2/cc-pVTZ level were carried out for the hypothetical tricyclo[2.2.0.0^1,3]hexane. The results indicate that the molecule under study should have one carbon atom with highly unusual inverted configuration. The analysis of the vibrational frequencies of this molecule as well as the analysis of its plausible decomposition routes performed at the DFT level indicate that this unique molecule could be a plausible synthetic target.     

Investigation of parameters affecting the on-line combination of supercritical fluid extraction with capillary gas chromatography

Two different injectors, a split/splitless injector and a programmed temperature vaporizer (PTV) injector were investigated as the interface in on-line supercritical fluid extraction (SFE)-capillary gas chromatography (cGC). The parameters affecting the chromatographic peak shapes as well as the quantitative performance of the interfaces in on-line SFE-cGC were identified and studied. Particular attention was paid to the case where modified extraction fluids were used. Experiments were performed on two different samples. The first sample consisted of PAHs spiked on sand at different concentration levels. The other sample was a polymeric material.     

Cyclodextrin-enhanced in situ bioremediation of polyaromatic hydrocarbons-contaminated soils and plant uptake

In situ bioremediation of polycyclic aromatic hydrocarbons (PAH) polluted soils can be improved by the augmentation of degrading microbial populations and by the increase of hydrocarbon bioavailability. β-cyclodextrin (β-CD) significantly accelerate the induction of hydrocarbon biodegradation, but it is not still clear its effectiveness during final, slower stages of degradation. Moreover, it is yet not known if the PAH uptake from plants is influenced by the presence of CD. A field study was carried out by creating two plots (A and B). Diesel fuel was spread on the surface, and on plot B a commercial microbial consortium and β-CD were spread. Soybean was seeded in both plots. Soil samples were withdrawn every 10 cm layers from 0 to 60 cm depth, before fuel spreading, immediately after seeding and after soya harvesting. Chemical and microbial analyses were carried out throughout the process to characterize the soil and to determine residual PAHs. Soybean seeds were analyzed for PAH content. It was observed that β-CD induced a significant increase of PAH degradation rate. The microbial inoculum did not improve the degradation; biodegradation activity was strong in superficial layers, and some PAH leaching was observed, that was reduced by CD. The analysis of PAH in soyabeans revealed that an uptake of hydrocarbons occurred, and that it was more significant in plot B. This suggests that the β-CD-enhanced bioremediation process can further be improved by phytoremediation, that could also allow to simultaneously reach an additional profit from a non-food yield for biofuel production.     

Trace analysis of volatile polar organics by direct aqueous injection gas chromatography

Summary Procedures for the quantitative analysis of industrial effluents which involve concentration by solvent extraction or the purge-and-trap method are time-consuming, labor-intensive, and prone to error. Direct aqueous injection gas chromatography using an electron-capture detector for the analysis of volatile halocarbons at the ppb level is in routine use in many laboratories. We now discuss the development of a similar protocol for the analysis of volatile polar organics such as acetone, methyl ethyl ketone, methyl isobutyl ketone, and tretrahydrofuran using a flame-ionization detector.     

Separation of polar and non-polar analytes using dimethyl sulfoxide-modified subcritical water

Separations using methanol–water or acetonitrile–water mixtures at different temperatures have been well investigated in reversed-phase liquid chromatography. However, reversed-phase separation with dimethyl sulfoxide (DMSO)–water mixtures is much less studied. In this work, separations of polyhydroxybenzenes, phenol derivatives, benzene, toluene, ethylbenzene, and xylenes (BTEX), and polycyclic aromatic hydrocarbons (PAHs) with DMSO-modified subcritical water were performed at several temperatures to evaluate the effect of temperature on the elution strength of DMSO–water mixtures. The column efficiency obtained by using DMSO-modified subcritical water was also studied. Finally, the resolution of ethylbenzene and p-xylene was investigated.     

Increase in removal of polycyclic aromatic hydrocarbons during bioremediation of crude oil-contaminated sandy soil

A 2³ full factorial experimental design was adopted to estimate the effects of three variables on the biodegradation of oil during soil bioremediation: bioaugmentation seeding a mixed culture, addition of fertilizer or mineral media, and correction of initial pH of the soil to 7.0. The tests were carried out in polyvinyl chloride reactors with 5.0 kg of crude oil-contaminated soil at 14 g/kg. After screening the variables, soil bioremediation tests were conduced with varied C:N ratios, yielding an increase in biodegradation of the oil heavy fraction from 24 to 65%, consumption of total n-paraffins, and a remarkable decrease in the concentration of residual polycyclic aromatic hydrocarbons of the soil.     

Amide interactions in chlorinated solvents

Enthalpies of solution and of transfer of amides for the solvents chloroform (CHCl₃), methylenechloride (CH₂Cl₂), carbontetrachloride (CCl₄), cyclohexane (C₆H₁₂), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), and ethylacetate (EtOAc) have been used to isolate and quantify the solvation interactions of amides in chlorinated solvents. Specific interactions at the aminde carbonyl and N–H groups have been identified. An analysis of the transfer enthalpies of pyrrole and methylpyrrole from cyclohexane to the chlorinated solvents shows that specific interactions between the pyrroles and these solvents are similar in nature. A means of calculating differences in the transfers of different solutes between the same solvent pair is given.Work done at Lebanon Valley College.